- Home
- en
- datalogger-monitoring-systems
- vaisala-accessories
Vaisala viewLinc Accessories
Extensive accessories for the viewLinc monitoring system
vNet-PoE interface for data loggers
(Power over Ethernet)
With this Vaisala vNet-PoE interface, Vaisala data loggers can be connected to your existing IT network by simply clicking them into place.
The built-in PoE technology (Power over Ethernet), which simultaneously supplies power to electronic components via the data line, also enables a secure connection without additional cabling or power supply units and at the same time simplest installation. As the PoE feed is usually protected against emergency power, this provides additional security.
This makes the installation of a central monitoring system child's play.
Protective cover for Vaisala humidity data logger
Waterproof and breathable protection against moisture and dust, specially designed for the DL2000 data logger series.
A moisture sensor that gets wet is saturated and remains unreliable until it is completely dry. The protective cover enables reliable recording of the relative humidity in wet environments with a tendency to splash water or even when air pollution is present. Can be closed with Velcro tape.
Temperature damping block
The mass of the block is used to attenuate the recorded temperature signal in order to suppress unwanted alarms, which often occur when refrigerator or freezer doors are opened for loading and unloading.
A simple, elegant and hygienic alternative to frequently used damping materials such as glycol or sand.
Example of a temperature recording in a refrigerator with and without a damping block.
Report on the test of a temperature damping block
Indicator, flashing light and audible alarm
Indicator with flashing light and audible alarm |
Power supply
24 VDC universal power supply unit |
Probe accessories
Spare part Probe Splitter M8/M12 |
HMT140 configuration cable set, spare part |
Spare part 1.5m cable for data logger probe |
Spare part 1m high temperature cable M8 |
Spare part 1m high temperature cable M12 |
Spare part M8 splitter for RFL100 |
Spare part 5 pieces RFL100 magnetic mounting bracket |
Spare part 5 pieces RFL100 mounting bracket |
Spare part 10m cable for RFL100 |
Spare part RFL100 and AP10 mounting kit |
Spare part 3m cable for RFL100 |
Spare part 5 RFL100 battery covers |
Spare part 5 pieces RFL100 mounting bracket |
Thermistor probes
Thermistor immersion V range probe 10' |
Thermistor V range probe 10' |
Thermistor N range probe 25' |
Thermistor V range probe 25' |
Thermistor immersion V range probe 25' |
Thermistor N Range probe 10' |
Thermistor immersion N range probe 10' |
Thermistor Immersion N Range Probe 25' |
Thermocouple probe
Type T thermocouple: 6m (20ft), (-200°C to +200°C), customer to connect/check |
Accessories and mounting
Magnetic probe holder, 5 pieces |
Mounting plate package for Veriteq data logger |
Thermally insulated block for external temperature probes (eliminates false alarms) |
Data logger jacket for SP-2000 data logger |
RJ45 with female DB9 connector (connects Digi One SP with CAT5 cable) |
Cable for connecting old style data loggers (Harwin connector) to Realport Digi |
Cable, CAT5e 10' flat, RJ45 plug |
Data cable, SH DB9(M)-DB9(F), 28AWG, 0.5 m, GREY |
1.5 m (5 feet) serial cable - data logger (DB9) to serial interface |
Veriteq USB to CAT5 interface cable |
1.5 m (5 feet) USB cable that connects to the DB9 connector of the data logger. |
USB interface pack for long distances |
Female RJ45 with DB9 connector (connects data logger to CAT5 cable) |
PoE Ethernet adapter with 4 relay switches (incl. power cable) |
Flashing light/audible alarm with PoE Ethernet adapter for use with viewLinc |